Свойства

Item Type:

3D Printer Z Axes Kit

Color:

Black

Product Material:

Aluminum Alloy, Stainless Steel, ABS

Screw:

T8 2mm Screw

Screw Length:

Approx. 365mm / 14.4in

How to Use:

1. Turn off the printer, unplug the power cord, and use a hex wrench to remove the 2 screws that secure the power supply. Remove the power supply.:

2. Install the coupler on the stepper motor and tighten the screws. Fasten the motor to the aluminum profile using the socket head cap screws and the Z axes motor bracket.:

3. Remove all the screws of the sheet metal pulley on the right side of the X axes.:

4. Fix the Z axes sheet metal with long screws and install it on the right sheet metal of the X axes. Thread the T8 screw into the coupler nut, then tighten the coupler screw.:

5. Install the dual Z stepper cable to the motherboard and connect the 2 Z motors.:

6. Install the cross screw and boat nut on the power supply bracket to install the power supply.:

Package List:

2 x Screw Bearing Guide:

2 x Power Bracket:

1 x Coupler:

1 x Z Axes Bracket:

1 x Stepper Cable:

1 x Z Axes Motor Bracket:

1 x Screw:

1 x Motor:

15 x Nut Caps:

17 x Nuts:

3 x Solenoid:

3 x Hex Wrench:

1 x Wrench:

1 x Screwdriver:

1 :